Discover How a Pipe Line Is Installed
It is another sign that we really are on an upward spiral with technology. Modern technology has helped us in resolving most of our problems and made plans together with equipment to accomplish tasks that were considered impossible once. From small to serious issues, everything can be taken care of. These days, there are many pipeline leakage problems that could be minimize as by way of installing quality pipe lining.
You may possibly be wondering on how pipe lining is installed. If you want to know more about this, then I suggest that you keep on reading.
Number 1. If you want to eliminate a culvert, then inspect it first to ensure that the liner will be able to get through it.
Number 2. There are a couple of ways of inserting the liner and it’s either done by pushing it or pulling it from the other side. On the other hand, it doesn’t mean that you ought to do the entire process manually since you can avail different equipment as well as techniques for it and do not forget to spare at least 5ft exposed portion. And to have an equal slope, it is vital that you have it aligned correctly.
Number 3. For improved security, consider installing a water tight seal, which could be carried out by installing or positioning a gasket. Installing the gasket to the groove will be recommended.
Number 4. Now is the time to attach chains and couplings when you are done. The chains should be double wrapped 2ft away from coupling and on each side of coupling, hoist a chain.
Number 5. At this stage, you can start snapping the liners. Male bevel has to be aligned in the female bevel. So see to it that you pull together the couplings which can cause the female end to make way for the male end as this expands. Assuming that you’ve correctly done the alignment, the couplings are going to snap lock.
Number 6. Fused liners should be inserted in culvert by pushing it. See to it that you keep pushing and pulling it until it makes the alignment perfect. Snap new piece of pipe to the preceding and once again, push and pull it to be able to fix the alignment in culvert. In each pipe that is inserted in the culvert, see to it that there is enough space so by that, they can join each other freely.
Number 7. Culvert ends need to be sealed and annular space must be grouted. In addition to that, the space between the annular space and the pipe lining must be grouted. This is done to be able to fill empty spaces that have formed at time of previous washout.